• Optical Isolation 30a Single Phase SSR 12v Dc
  • Optical Isolation 30a Single Phase SSR 12v Dc
  • Optical Isolation 30a Single Phase SSR 12v Dc
  • Optical Isolation 30a Single Phase SSR 12v Dc
Optical Isolation 30a Single Phase SSR 12v Dc

Optical Isolation 30a Single Phase SSR 12v Dc

Dettagli:

Marca: Gold
Certificazione: ISO9001:2000,EU, UL,CUL,RoHS
Numero di modello: SAQ2402D SAl4002D SAl4005D SAE4005D
Miglior prezzo Contatto

Informazioni dettagliate

nome: CA SSR del relè di CA SSR di singolo doppio nella linea certificato: ISO9001: 2000, UE, UL, CUL, RoHS
Tensione del carico: 40- 530VAC Scommessa di isolamento. In & fuori: Isolamento ottico ≥2500VAC 1min
Isolamento da rivestire: ≥2500VAC 1min Controlli la tensione: 3-32VDC
Controllo corrente: 6- 20mA (20mA@ input massimo 32VDC) Tensione d'apertura: ≤1.3VAC
perdita dello Fuori stato: ≤8mA Fuori stato dv/dt: 300v/μs 500v/μs
Tempo inserita/disinserita: 10ms @ 50Hz Gamma di Frequenty: 47/63Hz
Temperatura di funzionamento: -50~80℃ Dispositivo reale interno (triac): 12A 16A 24A 41A 50A 60A 80A 90A 100A 120A
Applicazioni: Riscaldamento elettrico, macchinario di plastica, automazione e controllo, ecc. Indicatore di condizione m/c: LED
Evidenziare:

Single Phase SSR 12v Dc

,

30a Single Phase SSR

,

SAP4805D 30a Ssr

Descrizione di prodotto

AC SSR Relay AC SSR of Horizontal Type Double LED Indicator

 

 

 

Specification of  AC Single Phase SSR Solid State Relay

 

AC SSR Relay AC SSR of Horizontal Type Double LED Indicator

 

 

 

 

Main technical paramete

Type

SAP4805D SAP4810D SAP4820D SAP4825D SAP4840D SAP4850D SAP4860D SAP4880D SAP4890D SAP48100D
Load voltage range 40- 530VAC
Max Load current 5A 10A 20A 25A 40A 50A 60A 80A 90A 100A
Isolation bet.In & out Optical isolation ≥2500VAC 1min
Isolation to case ≥2500VAC 1min
Control voltage range 3-32VDC
Control current 6- 20mA(20mA@ max input 32VDC)
Output Zero switching
Turn-on voltage ≤1.3VAC
Off-state leakage ≤8mA
Off-state dv/dt 300v/μs 500v/μs
On or off time 10ms @ 50Hz
Frequenty range 47/63Hz
Status indicator LED
Operating temperature -50~ 80℃
Internal actual device 12A 16A 24A 41A 50A 60A 80A 90A 100A 120A
Applications Electric heating, Plastic machinery, Automation and control, etc.

 

 

  

 

AC SSR of Horizontal Type Double LED Indicator

 

 

 

 

 

Main technical paramete

Type

SAP4805D-L SAP4810D-L SAP4820D-L SAP4825D-L SAP4840D-L SAP4850D-L SAP4860D-L SAP4880D-L SAP4890D-L SAP48100D-L
Load voltage range 40- 530VAC
Max Load current 5A 10A 20A 25A 40A 50A 60A 80A 90A 100A
Isolation bet.In & out Optical isolation ≥2500VAC 1min
Isolation to case ≥2500VAC 1min
Control voltage range 3-32VDC
Control current 6- 20mA(20mA@ max input 32VDC)
Output BCR, Zero switching Two SCR inverse parallel, Zero switching
Turn-on voltage ≤1.3VAC
Off-state leakage ≤8mA
Off-state dv/dt 300v/μs 500v/μs
On or off time 10ms @ 50Hz
Frequenty range 47/63Hz
Status indicator In LED and out on LED
Operating temperature -50~ 80℃
Internal actual device 12A 16A 24A 41A 50A 60A 80A 90A 100A 120A
Applications Electric heating, Plastic machinery, Glass equipment, etc.

 

 Optical Isolation 30a Single Phase SSR 12v Dc 0

 

There are two main areas of the solid state relay:

SSR input: There are a number of aspects of the input circuit to consider as the input LED needs to operate under the required input conditions:
Input drive level: The input circuit needs to ensure that the optical transmitter, i.e. LED is able to operate wit the specified drive level. This normally requires the inclusion of a current limiting resistor and any other electronic components to ensure the LED lights sufficiently with the incoming signal. Solid state relays are available that operate with input voltages of anywhere from a few volts upwards.
DC or AC input: If the SSR is intended for operation with a DC input then it can operate with a minimum of additional electronic components - possibly just a current limiting resistor. If AC operation is intended, then a rectifier and normally a bridge rectifier is used to rectify the input signal so that the LED is only driven with a signal of the correct polarity. The LED light will pulse with the alternating waveform - twice the frequency if a bridge rectifier is used. This bridge rectifier can be incorporated as part of the solid state relay, or possibly added externally.
SSR output: The output side of the solid state relay also requires understanding as there can be a number of additional electronic components beyond the basic photo-sensitive switching device.

A variety of different devices can be used for the output of solid state relays: transistors, thyristors / SCRs, MOSFETs and triacs. The device type determines many of the characteristics of the SSR.

If the output is a single transistor, FET or thyristor / SCR then this means that this SSR can only conduct in one direction and can only be used for controlling DC loads. A triac or two thyristors / SCRs in the output are generally required for AC operation - paired MOSFETs are also sometimes used.

The specified maximum output ranges for solid state relays can range from a few volts up to hundreds of volts AC or DC and the current levels that can be carried can be up to tens or even hundreds of amps according tot he specification of the particular device.

 

 

 

Our Company

 

Founded in 1992, Wuxi Gold Control Technology Co., Ltd., a private high tech company, is specialized in the research and production of Solid State Relays, Electronic Semiconductors, DC Motor Drivers and AC Voltage Regulation Devices.

 

For the past 10 consecutive years, our company has been qualified as "Jiangsu's private high tech business". We have also been given the honor as "Wuxi's 10 Best Private Science & Technology Enterprises" for years.

 

Our products, the electronic modules with the brand of Gold, have been listed among "Wuxi's Renowned Products".Our company has 5 patents on Solid State Relays. Our products are widely used in various industrial automation control areas like chemical fiber machinery, temperature control of electric furnace, rubber & plastic machinery, fountain control and digital-controlled machinery, and are sold to Europe, America, Korea and Turkey.

 

Optical Isolation 30a Single Phase SSR 12v Dc 1

 

Our Factory

 

Our factory can produce about 50,000 pieces each month. We can give you good quality and reasonable prices. We have 20 professional research people who have all been graduated from famous universities and colleges. When producing, we have strict tests: self-test, inter-test and special-test.

 

    Optical Isolation 30a Single Phase SSR 12v Dc 2

 

Our Certificate

 

Our products, the electronic modules with the brand of Gold, have been listed among "Wuxi's Renowned Products".Our company has 5 patents on Solid State Relays. Our products are widely used in various industrial automation control areas like chemical fiber machinery, temperature control of electric furnace, rubber & plastic machinery, fountain control and digital-controlled machinery, and are sold to Europe, America, Korea and Turkey.

 

Our company passed the Certification of ISO9001:2000 in 2000. Our main products have been given CE Certificate of European Union, UL,CUL and RoHS Certificates.

 

Optical Isolation 30a Single Phase SSR 12v Dc 3

Optical Isolation 30a Single Phase SSR 12v Dc 4

 

Vuoi conoscere maggiori dettagli su questo prodotto
Sono interessato a Optical Isolation 30a Single Phase SSR 12v Dc potresti inviarmi maggiori dettagli come tipo, dimensione, quantità, materiale, ecc.
Grazie!
Aspettando la tua risposta.